Club 80-90 Forums

Hi all. Hope you've had a brill Christmas
I have since a bought my T25 had problems with the sliding door rod bit. It keeps working loose and end up not being able to open the door. One end is (the one near the handle) is fixed with a circlip the other isn't and I've tried all sorts to make it stay in place with no luck yet. I've had a small bolt through it with a lock nut this has worked loose! It's very awkward to get at to fit anything on tightly. Any suggestions?

can you post up a picky of the offending part/area whatever
mm

should be the same fitting at each end an e clip, nla from vw, have a used one here they are the same early and late so any of the breakers should be able to help