Page 1 of 1
Carb gasket for 1.9 WBX/ Pierburg
Posted: 16 Dec 2011, 09:08
by AdeyB
Mornin'
About to replace the carb on the "Snail", is there and if there is, what is the part number, for any gasket required between base of carb and inlet mani.
Or does it seal on a reusable rubber mounting thingy?
Cheerski verski muchski
Adey
Re: Carb gasket for 1.9 WBX/ Pierburg
Posted: 16 Dec 2011, 09:32
by Novice in need
Hi contact Gower & Lee,
I had a right job getting the gasket, however a fellow member helped me out.
Sorry i cant off the top of my head remember the part number.
Re: Carb gasket for 1.9 WBX/ Pierburg
Posted: 16 Dec 2011, 10:11
by AdeyB
Thanks!
Will investigate
Adey
Re: Carb gasket for 1.9 WBX/ Pierburg
Posted: 16 Dec 2011, 10:18
by Aidan
got a new one for 2wd in stock back at the unit Monday call me then if interested
Re: Carb gasket for 1.9 WBX/ Pierburg
Posted: 16 Dec 2011, 21:35
by AdeyB
Cheers Aidan. If Bromyard ain't got one I'll give you a buzz.
Ade
Re: Carb gasket for 1.9 WBX/ Pierburg
Posted: 16 Dec 2011, 23:08
by Novice in need
Aiden sorted me out with the gaskets, if i was you i'd grab him by the balls (not literally) and take him up on his offer. He really saved me alot of hassle.
Good luck hope you get your bus running.
Re: Carb gasket for 1.9 WBX/ Pierburg
Posted: 17 Dec 2011, 00:04
by AdeyB
The carb is coming from Bromyard's: he reckon's he's got one.
Either way, I'll phone Aiden monday!!!!
Cheers!
Ade
Re: Carb gasket for 1.9 WBX/ Pierburg
Posted: 19 Dec 2011, 10:51
by AdeyB
Cheers Aidan!