Page 1 of 1
set of bfg mt
Posted: 09 Dec 2011, 19:55
by axeman
not mine or any thing to do with me,
http://www.ebay.co.uk/itm/BFG-mudterrai ... _500wt_933" onclick="window.open(this.href);return false;
neil
Re: set of bfg mt
Posted: 10 Dec 2011, 19:30
by Hairyface
Stupid question, but can you run Freelander rims on a syncro, ie do they have the same stud pattern and are they suitable for the weight. I am running a hi top camper with a 2.2 Audi conversion. Will the weight be an issue.
Re: set of bfg mt
Posted: 10 Dec 2011, 19:46
by axeman
dont know about the wheels i am afraid, best to asume not.
neil
Re: set of bfg mt
Posted: 10 Dec 2011, 20:06
by slobbo
Any rims you run on a Syncro must be rated for at least 850kg a corner otherwise you will end up bending them. The Freelander ones won't fit. The T3 is a 5 stud and has a PCD of 112 and the Freelander is 5 stud but has a PCD of 114. So won't fit.
The size you need for a T3 is 5 x 112 with a centre of 66mm. Offset is 39 but some flexibility here.
Check out the wiki. lots of info there.
Re: set of bfg mt
Posted: 10 Dec 2011, 20:42
by Hairyface
Cheers for the info. I will just spend my cash on my other rubber fetish!!