Page 1 of 1

Rear Side Window Vents - Photos for MetalMickey

Posted: 25 Nov 2011, 12:46
by Mickyfin
Here you go Mick..

Image

Image

And from inside...

Image

Image

Re: Rear Side Window Vents - Photos for MetalMickey

Posted: 25 Nov 2011, 18:08
by Plasticman
Well Im by no means an authority on these or anything else but for what its worth these are on the Atlantic.
external showing the perforated strip
Image
external, note round holes
Image
internal
Image
might be good to see how many different types/ styles there are and reference them.
mike

Re: Rear Side Window Vents - Photos for MetalMickey

Posted: 26 Nov 2011, 09:22
by Mickyfin
Interesting mate, first time Ive seen those rounded holed ones too.

Re: Rear Side Window Vents - Photos for MetalMickey

Posted: 28 Nov 2011, 08:52
by billy739
on double glazed units are the vents part of the main window , or like the glass ones are they seperate.

obviously double glazed vents are different to normal ones. poss just made by the same peeps as the double glazed units.

Re: Rear Side Window Vents - Photos for MetalMickey

Posted: 28 Nov 2011, 09:36
by Plasticman
One piece on these
mm

Re: Rear Side Window Vents - Photos for MetalMickey

Posted: 28 Nov 2011, 13:45
by billy739
that explains the finish then!

and they are more rocking pooh than the non vented double glazed units

Re: Rear Side Window Vents - Photos for MetalMickey

Posted: 28 Nov 2011, 14:35
by lloydy
I have those double glazed units with vents on mine, same round vent holes. They vent and d/g window are only held together by a bit of tape. I also have the vents for the glass windows sitting in my hallway if there was something In particular you wanted

Re: Rear Side Window Vents - Photos for MetalMickey

Posted: 28 Nov 2011, 16:53
by Plasticman
held together with tape? without going out to look they were a solid item as Ive just refitted them ,ok may/will have been joined at some point but the shiny vent you see on the outside is rigid with the glazed part if that explanation makes sense
mm

Re: Rear Side Window Vents - Photos for MetalMickey

Posted: 28 Nov 2011, 17:00
by lloydy
Spooky, just looked at this topic as you replied!
I agree they are solid, one looked like it was one piece. The other side, the tape you can see in your first pic came off and the one part became two. They literally butt up to each other and the tape seems to hold them together. The glass window fits into a little slot on the vent

Re: Rear Side Window Vents - Photos for MetalMickey

Posted: 28 Nov 2011, 17:05
by Plasticman
Hmm , that would figure , but as these were really really solid then they must have been bonded. perhaps your have had some 'work' done :lol:
mm

Re: Rear Side Window Vents - Photos for MetalMickey

Posted: 28 Nov 2011, 17:14
by lloydy
Yep, probably we're bonded. (just the edge of d/g window, so not too strong)The 'work' was probably me trying to get them fitted without removing the wardrobe, and yes the window did go in :D

Re: Rear Side Window Vents - Photos for MetalMickey

Posted: 28 Nov 2011, 17:17
by Plasticman
:shock: how did you work that one :?: the mind boggles and I wont ask about your dexterity
mm :ok

Re: Rear Side Window Vents - Photos for MetalMickey

Posted: 28 Nov 2011, 18:13
by lloydy
Me and jed did it, bit long winded to type on a phone. Can let you know later if you like?

Re: Rear Side Window Vents - Photos for MetalMickey

Posted: 28 Nov 2011, 23:11
by Plasticman
No its ok I figured out a way that I suppose is the same as you ended up lol
mike