Page 1 of 1
HI i need to lock the flywheel to undo its bolts
Posted: 07 Nov 2011, 21:34
by Niander
HI i need to lock the flywheel to undo its bolts as the crank seal is leaking behind
1.9 1y diesel
whats the best way to lock it .... and do i need new bolts?
cheers
Re: HI i need to lock the flywheel to undo its bolts
Posted: 08 Nov 2011, 17:37
by faggie
on a air or petrol watercooled t3 you can use a flywheel lock not shure about diesels as i dont do diesels
Re: HI i need to lock the flywheel to undo its bolts
Posted: 13 Nov 2011, 07:33
by jebiga41
stick an impact gun on it should free the bolts without locking it
Re: HI i need to lock the flywheel to undo its bolts
Posted: 13 Nov 2011, 08:10
by gaz f
Or if you don't have an impact gun a socket on a Tbar and a sharp whack with a hammer on the end of the bar normally cracks them no problem.
You do need to fit new bolts when you replace it.
Re: HI i need to lock the flywheel to undo its bolts
Posted: 22 Nov 2011, 19:23
by Niander
I got a long steel bar and drilled 2 holes matching clutch bolts...worked a treat