Page 1 of 1
Devon side pop owners...
Posted: 25 Oct 2011, 18:46
by aardvark101
All,
I need some advice, I need to change the gas struts on the roof and the ones I have seen come in sets of 4 - however my van has 1 at the front and 2 at the back Do you know where I can by the 3 set pack?
Cheers
Aardvark101.
Re: Devon side pop owners...
Posted: 26 Oct 2011, 07:49
by Aberdeenbus
Hi
mine is the same, and I searched every where for three but no one would sell just three unless I ordered them from a non camper type place like a motor factors or a ram specialist and that worked out at more than the four from the Campershop.
So i have a spare the good news is they went on ealiy enough and came within a couple of days.
Si
Re: Devon side pop owners...
Posted: 26 Oct 2011, 21:02
by aardvark101
Aberdeenbus,
Can you tell me which set you bought? Was it
http://campershop.co.uk/devon-t25.htm" onclick="window.open(this.href);return false; @ £119?
Cheers
Re: Devon side pop owners...
Posted: 28 Oct 2011, 07:54
by Aberdeenbus
Hi,
yep those the the ones, easy to fit, mind you I did have the canvas off at the time.
Have fun,
Si
Re: Devon side pop owners...
Posted: 28 Oct 2011, 22:10
by Plasticman
did you gt sorted as I may have a few
mm
Re: Devon side pop owners...
Posted: 02 Nov 2011, 18:04
by aardvark101
Thx for the clarificaion Aberdeenbus - they are the ones I ordered... (phew!)
Metalmick8y - cheers for the offer, but I had already ordered (sorry for the late replies).
Fingers crossed all goes as planned.

Re: Devon side pop owners...
Posted: 08 Nov 2011, 20:04
by swimmermjs
Hi,
I replaced the struts on my Deveon early this year - only had 3 but bought the 4 pack. Have noticed after using THE van over the summer that the front single strut is starting to show signs of bending and when the roof is up the front sags slightly. Has anyone fitted the fourth strut at the front?
Michael
Re: Devon side pop owners...
Posted: 09 Nov 2011, 08:16
by billybigspud
i have got 4 struts on mine. it shouldnt be too hard to fit another as all they are are studs with a big flat plate on the back and you would only be drilling fible glass with wood in it. suppose just copy the other end.