Page 1 of 1
Leaking head gasket
Posted: 22 Oct 2011, 17:32
by bigjon123
Hi everyone Im a newbie to this site.I am currently restoring a T25 Devon Sunrise and have found a leak on one of the head seals as the funds have dried up can any one tell me if there is any product i can use that will stop the leak; Thank you all any help would be great.
Re: Leaking head gasket
Posted: 22 Oct 2011, 17:42
by shepster
Some success has been had with a product by 'Wynns', It works differently to other types of 'radweld' I believe.
Obviously the only permanant cure is a strip down but you have nowt to lose by giving this a try.
Re: Leaking head gasket
Posted: 22 Oct 2011, 17:49
by R0B
This is good for sealing small leaks..
Re: Leaking head gasket
Posted: 22 Oct 2011, 17:52
by bigjon123
Hi thanks for the reply is that the steel seal i have heard about you are right a strip down will have to be done but funds are low at moment lol.
Re: Leaking head gasket
Posted: 22 Oct 2011, 17:57
by shepster
bigjon123 wrote:Hi thanks for the reply is that the steel seal i have heard about you are right a strip down will have to be done but funds are low at moment lol.
Steel seal?
Re: Leaking head gasket
Posted: 22 Oct 2011, 18:17
by R0B
Never heard of this stuff until now.But have used kseal with success.If you do go with the steel seal.It aint cheap £34.99.(A tad cheaper on ebay) Let us know how you get on.
http://www.steelseal.co.uk/index.asp?fu ... roductid=1" onclick="window.open(this.href);return false;