Page 1 of 1
sliding door sill/runner repairs
Posted: 15 Oct 2011, 09:05
by stevo1980
Hi i was wondering if anyone has tackled this as my runner inside is becoming quite rusty and has a few holes in how easy is it to replace and can i get a new part from anywhere. Cheers
Steve
Re: sliding door sill/runner repairs
Posted: 15 Oct 2011, 10:08
by petermoore
Hi there. It is quite a tricky repair to make. My advice is to use plenty of weld through primer. Tack everything or use self tappers to hold things in place. Then try the sliding door. Keep trying everything in place until you get a good fit.
Parts are available from a number of places Alan Schoffield or VW heritage are best for body panels IMHO
Re: sliding door sill/runner repairs
Posted: 15 Oct 2011, 10:55
by jimpainter
/\/\/\/\
WHS
Not the easiest place to repair.
But it can be done and the repair panels are fairly cheap for this area.
How bad is it?
Pics would help.
Re: sliding door sill/runner repairs
Posted: 15 Oct 2011, 17:22
by Plasticman
indeed .lets have pickies so we can se what were talking about
mm