Page 1 of 2

Help! Bull bar wont seem to fit

Posted: 11 Jul 2006, 17:04
by jlk55
Hi there, we recently bought a bull bar for our type 25 camper from a chap at the autojumble at Stonor. He assured us it came off his Caravelle and as we didnt have out type 25 with us, had our type 4 instead, we took his word for it. However since we have tried to fit it, it doesn't line up with the chassis and we are worryed it isnt for a type 3 after all. Can anyone who has one let us know how it should fit on, as without seeing one it is difficult to see. Are any modifications needed to make it fit? Would appreciate any help so we dont waste the money we spent on it, by not being able to use it.
John

Posted: 11 Jul 2006, 18:29
by ermie571
ours didn't seem to fit either - until 3 of us tried - me and son holding the thing up, and John underneath with bolts and the odd swar word!!

It wasn't obvious from first look and fit - but we got there eventually .

There is a slot on the underside of the chassis rails, that stubby bits on the bull bar bracket that slotted into these holes in the chassis. We then had brackets that did not appear to fit over the chassis rail - they looked way too small. But once the thing was offered up, and bolts done up, the bracket tightened over the chassis.

It made alot more sense once it was offered up.

You got any piccies - or we can take piccies if it helps

Emma and John

Posted: 12 Jul 2006, 11:00
by Aidan
they do vary, made by diferent manufacturers - the ones from SA require removal of the tow hitch to fit
Sell it on, you know it makes sense

Posted: 12 Jul 2006, 14:04
by Diamond Hell
If you turn it the other way it will fit in a skip just fine.

Posted: 12 Jul 2006, 15:54
by "WEAZLECHIN"
hhm. i couldnt get mine to fit either, probably cos it came off a 1956 freight train

Posted: 12 Jul 2006, 16:44
by Horza
The stock answer would be "cut six inches off the bottom, then another six, then another, then another until you only have six or less left. Than it will go in a wheely bin and you don't have to find a skip" Don't sell it on, that's just passing a child decapititation device into someone else's hands; destroy it while you can!

I know this kind of thing is frowned apon by the whingers but honestly they should be illegal.

Posted: 12 Jul 2006, 17:00
by jlk55
Diamond Hell
:lol: The reason we want it, apart from the Taliban moving into the area, I am quite concerned about Jake ( Syncro 101 ) driving over the top of ours to try and prove to us its better to have a Syncro :lol:

Posted: 12 Jul 2006, 17:12
by "WEAZLECHIN"
be very suspicious with that taliban you know. they look weird in those pyjama thingies !!!

Posted: 12 Jul 2006, 17:15
by R0B
orrible bliddy things.cut them up whilst you can.(i suppose this forum will go to no replys if this carrys on).... :lol:

Posted: 12 Jul 2006, 17:46
by Horza
i suppose this forum will go to no replys if this carrys on

:rofl :rollin :rofl

*cough*

Posted: 12 Jul 2006, 18:40
by guz
i'd extend it some, then you can
behead adults, not just kids.

:twisted:

Posted: 13 Jul 2006, 00:24
by jen
sukhoi27 wrote:orrible bliddy things.cut them up whilst you can.(i suppose this forum will go to no replys if this carrys on).... :lol:




Image



Image

Posted: 13 Jul 2006, 06:34
by Mocki
we should switch the whole "frelling" lot off.
is there any wonder this club is getting the bad name it is everywhere?
if you cant answer the question, dont bloody answer at all......

Havent you run enough people away from here already?

Posted: 13 Jul 2006, 07:24
by Horza
:shock:

Me? Hah!