Distributor cap... which one do I need?
Posted: 11 Jul 2006, 12:22
Hi Guys,
I had a tad of 3 cylinder action at the weekend after putting the front of the van back together. When I checked I have a perished HT lead with a hole in it and a corroded lead and also dizzy cap. Managed to get going with some sandpaper but need to replace leads and cap.
Leads on JK are £17 ish
The cap is orange in my bus and has this written on it:
1235 522056
200
The engine is the original CU no 080258
Aircooled
Any idea which dizzy cap I need, and any suggestions on where to purchase cheaper than JK well appreciated.
Ta
I had a tad of 3 cylinder action at the weekend after putting the front of the van back together. When I checked I have a perished HT lead with a hole in it and a corroded lead and also dizzy cap. Managed to get going with some sandpaper but need to replace leads and cap.
Leads on JK are £17 ish
The cap is orange in my bus and has this written on it:
1235 522056
200
The engine is the original CU no 080258
Aircooled
Any idea which dizzy cap I need, and any suggestions on where to purchase cheaper than JK well appreciated.
Ta