Club 80-90 Forums

Would anyone have one of these fitted?

Mine is bare with no fitting gear so i don't have a clear idea how it should mount at the front crossmember/subframe.

Is anyone using the space for anything novel?

Haven't got any decent pics, but how about one of those spare-wheel LPG tanks?

I considered it but have been told there isn't enough room for one

if your front subframe hasn't got the hinge's already welded to it they you will have to make them; I used 2wd ones and modified them as i knew they were the right internal diameter for the top loops. You'll need to get 205 loops to to maximise the space. You could build a waterproof box to fit the space and carry spare shafts and the like, I use it for spare wheel though

I think spare wheel would be ideal for me.

I plan on carrying 2 (one on the back) so one under the front would be ideal - plus it means I can lose the bullbar (which currently houses the spare).

Can you get a 215/75R15 under there?

It may be possible,
might have to let the air out first!
Its tight between the chassis rails.

I will try and post some pictures up later.

Jed

jed

I carry spare space in that area. You never know when you will need it!