Page 1 of 1

14"/16" Doka - rear door upper threshold

Posted: 31 Aug 2011, 04:30
by Yozza
Hello (again)

I've been away from the forum, (extra family members and other projects too). I have started to get back in the garage and re-start on the Doka project as it may be of extra use on another project I'm on (self build).

The previous owner started to convert it from a 3 door to a 4 door doka and has done a lot of the work (I'm now picking up the pieces - literally).

I've put in the necessary metal work to hold the door rubber in position, but the one piece I don't have is the metal work for the upper piece with the corner re-enforcements.

So I'm after a part number if they can still be bought??? or.... do any of you good folk :D have a 'scrap' doka with good metal work in this area? I may be able to use metal work from a 14" and adapt if there's not too much difference???

I'm also going to VF (Sunday) so I could also view/discuss/deal there?

Yozza (born again T3 enthusiast)

Re: 14"/16" Doka - rear door upper threshold

Posted: 31 Aug 2011, 06:07
by Aidan
roof frame for left rear door is 248 817 555 , obsolete vw try classic or heritage

Re: 14"/16" Doka - rear door upper threshold

Posted: 31 Aug 2011, 08:06
by Yozza
Thanks :D

Re: 14"/16" Doka - rear door upper threshold

Posted: 31 Aug 2011, 10:41
by xriss
try kevin "letshaveabus" i tthink hes got what you require

Re: 14"/16" Doka - rear door upper threshold

Posted: 31 Aug 2011, 19:07
by Yozza
Thanks, spoke to Kev, and he's got a donar. :D

Re: 14"/16" Doka - rear door upper threshold

Posted: 31 Aug 2011, 20:07
by ELVIS
Got O/S (passenger on a LHD) roof section and also the B pillar with all the strengthening parts/lock mount etc and also a door if it falls thr with Kev. :ok