Page 1 of 1
Help : Rolling road tuning, reasonable distance of C London
Posted: 25 Aug 2011, 11:53
by Sunray
I need my bus tuned properly on a rolling road as it drives like a dog.
One recommendation on here was BD engineering in Kent, which is about 40 miles, but his work shop entrance is only 2.1m high so my bus with its pop top will not fit.
So is there any one else anyone can recommend?
Re: Help : Rolling road tuning, reasonable distance of C London
Posted: 03 Sep 2011, 12:14
by Fritz
I'd be trying to find someone local who can give your motor the basic once over if you are having running concerns, to be honest the only pieces of kit you should need for one of these vehicles is an exhaust gas analyser and a timing light.......
Regards,
Fritz,,,,,,,,,,,,
Re: Help : Rolling road tuning, reasonable distance of C London
Posted: 03 Sep 2011, 13:22
by Sunray
Fritz wrote:I'd be trying to find someone local who can give your motor the basic once over if you are having running concerns, to be honest the only pieces of kit you should need for one of these vehicles is an exhaust gas analyser and a timing light.......
Regards,
Fritz,,,,,,,,,,,,
its a recon engine with the Weber replacement for the pierburg.
A few people on here have said rolling road tune when you swap the carb over like that is a good idea.