Club 80-90 Forums

What's the best stuff for sticking door seals on with?

Evostik 528 or 3m weatherstrip adhesive

Cheers. Thought it may have been something more specialist

Hi
Etka says use this type of thing for the Cab doors

http://www.ebay.co.uk/itm/Double-Sided- ... 23108778b4" onclick="window.open(this.href);return false;

I did and its fantastic , I used evostick on the slider seal though.

Si

How much evo-stick will I need for two cab door seals and the slider?

500ml. Or is that too small do you think?

I used/use a small tube.(evo red)
run a really small bead in the door and run it along with your pinky then hang the seal up and smear a real small ammount on the rubber and it should all be about touch dry by the time you finnish then fit, remember its contact adhesive so usually one go hence keep the glue in the bottom only else the seal will stick to the sides on its way in..
mike

why not use some of this....























sorry...its makes me laff and i dont know why

Good call

http://www.screwfix.com/p/evo-stik-stic ... 90ml/87228" onclick="window.open(this.href);return false;

I wouldnt, id use evo red.
M

I'll use evo red on one door, evostick sh*t on another and 528 on the slider

What is the real name for evo red?

this little old 30g tube did the 3 seals you speak off and theres enough left to do it 3 times over.(or 4 if your a lancastrian)
and the small nozzle lets you just get it in the bottom of the seat/recess, if you dont then as said it will bond on the way in
mike

I'll see your Evostik Red and raise you Evostik 528 Green

bit hard to pour that into the bottom of a narrow orifice unless held from a great height , then you would no doubt miss the hole
mike