Page 1 of 1
table floor base
Posted: 20 Aug 2011, 09:43
by twindub1
Hi all, does anyone know the height of a table base for the floor. Rather than having to drill a hole in the cargo floor, the other option is to fit a surface one
what has everyone one else done
Cheers
Re: table floor base
Posted: 20 Aug 2011, 10:07
by kevtherev
Cut a hole...
Re: table floor base
Posted: 20 Aug 2011, 12:14
by 72BUG
kevtherev wrote:Cut a hole...
How deep does the hole have to be Kev? I assume you only have to cut into the baseboard and not the bodywork?
Thinking of fitting one myself.
Cheers.
Re: table floor base
Posted: 20 Aug 2011, 12:41
by twindub1
the hole has to be 50mm depth... so either you raise your floor with wood batterns then hardboard to allows for depth , or you cut hole in cargo floor.
Re: table floor base
Posted: 20 Aug 2011, 17:26
by kevtherev
Standard hole saw does it easily.
Once fitted a liberal spraying of chain grease seals it up
Re: table floor base
Posted: 20 Aug 2011, 17:36
by 1664
You can do a surface job by using the same fitting the pole goes into as the table itself. Downside is it looks cr@p and pokes up so you'll be constantly tripping over it....................
Re: table floor base
Posted: 20 Aug 2011, 17:48
by kevtherev
indeed...
Re: table floor base
Posted: 20 Aug 2011, 18:58
by twindub1
ok thanks, mind made up... in the cargo floor it is then...
cheers