Page 1 of 1
Starting Problems
Posted: 06 Aug 2011, 20:10
by kemshell
Hi Guys, I have a 1981 2L aircool van. When the van has been standing for about 5 days the only way to start the van is a spray fuel into the carbs. The van has been into the garage a number of times and I have been told the fuel pump is working ok. It was also just had a new starter motor
Anybody got any ideas?
Thanks..... Paul
Re: Starting Problems
Posted: 06 Aug 2011, 20:43
by john1
Are the chokes on?
Re: Starting Problems
Posted: 06 Aug 2011, 20:58
by kemshell
thanks john, not sure how to telling if the chokes are on.
Re: Starting Problems
Posted: 06 Aug 2011, 21:13
by john1
when cold, press gas pedal. Now go look down the carbs, the flaps should be closed.
When running these will open as it warms up. Thats if you have auto chokes???
Re: Starting Problems
Posted: 06 Aug 2011, 21:21
by kemshell
Thanks, yes I think they are working, I will check in the morning
Re: Starting Problems
Posted: 07 Aug 2011, 18:33
by kemshell
chokes seem find. Any more ideas?
Thanks
Re: Starting Problems
Posted: 07 Aug 2011, 19:53
by cygnak
What carbs have you got? I had the same with the Dellorto's until i fitted a non-return valve in the fuel line. I also fitted an electric fuel pump that helps prime the carbs, in place of the mechanical which only pumps when the engine turns over.
Re: Starting Problems
Posted: 07 Aug 2011, 21:27
by kevtherev
Air leak on the pump?
Re: Starting Problems
Posted: 08 Aug 2011, 18:06
by john1
I also fitted an electric fuel pump last year, turn the key primes up to carbs then starts first time.
Sound like the fuel is not getting there right away.
Do you have to turn over for a while before she fires?
Re: Starting Problems
Posted: 10 Aug 2011, 20:14
by kemshell
It starts fine first time when the vehicle has run the previous day. The problem only occurs when it has been left for more that 5 days, it is as though all the fuel drains out of the engine.
Re: Starting Problems
Posted: 10 Aug 2011, 21:09
by kevtherev
..... Which is the symptom of an air leak at the pump.....
Re: Starting Problems
Posted: 11 Aug 2011, 20:32
by kemshell
Thanks