Page 1 of 1

15mm lightweight ply supplier

Posted: 13 Jul 2011, 12:49
by dougt25
Hi all,

Does anyone know where i can buy a couple of sheets of lightweight ply. I need 15mm oak veneered. It's really hard to buy.

Vohringer make it and Morland UK but i cannot find a supplier.

Any help greatly appreciated.

Doug

Re: 15mm lightweight ply supplier

Posted: 13 Jul 2011, 13:06
by Ian Hulley
Autocraft Motorcaravans Staveley, near Chesterfield, just off M1 J29A :ok

Re: 15mm lightweight ply supplier

Posted: 13 Jul 2011, 13:15
by dougt25
Thanks Ian,

I'll give them a ring and see if they deliver to Cornwall.


Cheers

Doug

Re: 15mm lightweight ply supplier

Posted: 13 Jul 2011, 13:24
by Ian Hulley
There's another place near Bristol as well ... I'm 99% sure they won't want to deliver to that far-flung part of the empire :lol:

Ian

Re: 15mm lightweight ply supplier

Posted: 13 Jul 2011, 13:42
by dougt25
I thought Cornwall was right in the centre of the empire? :)

Re: 15mm lightweight ply supplier

Posted: 14 Jul 2011, 13:39
by mattrsa
I bought some directly from morland uk a few weeks ago, it was not cheap but is nice and lightweight.

Think it was about 110 a sheet

They will deliever but it will cost you £60 and need to order a min of 2 sheets

Got some pics of mine (oak)if you are interested

Re: 15mm lightweight ply supplier

Posted: 15 Jul 2011, 08:48
by dougt25
Excellent , Thanks Matt.

Did you just phone them direct using the number on the website? The oak veneer is the stuff I am after.

Would be interested to see some pics... Is it good stuff?

Re: 15mm lightweight ply supplier

Posted: 15 Jul 2011, 09:18
by mattrsa
Hi Mate

Yeah just phoned them direct on the number on the website

I think the wood is great although don't have any experience with other lightweight alternatives

Here is a link to flickr where I have uploaded a few pics.
http://www.flickr.com/photos/mattcripps/

Not the best quality pics but they were taken on my phone.

Hope this helps, let me know if you need any more info

Re: 15mm lightweight ply supplier

Posted: 16 Jul 2011, 20:31
by the_mitchells
christ!!! is it really that expensive??? was going to re-do the interior but i tink it might be very expensive :(

Re: 15mm lightweight ply supplier

Posted: 18 Jul 2011, 11:40
by dougt25
Is it a rewal wood veneer finish or is there some kind of laquer or vinyl on top?

Looks like really good stuff. - expensive but good worthwhile.

IS two sheets enough for all doors etc?