Page 1 of 1

2.1dj and 1.9dg piston rings

Posted: 28 Jun 2006, 08:25
by T'Onion
is there a differance ?
been looking at some websites and some say no and some say yes ? confused i am :?

Posted: 28 Jun 2006, 10:12
by Mocki
most definately yes
there IS a difference

Posted: 28 Jun 2006, 11:45
by T'Onion
see thats wot i thought and got told , but gsf and europarts list a set that do the 1.9 and the 2.1 ?
confused i am

Posted: 28 Jun 2006, 11:49
by HarryMann
Well, there's are the same then or they add an extra ring in the pack that does the other engine... and VW's are slightly different (but it doesn't matter - much :roll: )

Not that i know a darned thing about them :wink:

Posted: 28 Jun 2006, 11:55
by Pickles
I bought my 2.1 rings from Euro Car Parts. They are different from the 1.9 rings. Euro car parts sell both It is only the 3rd ring that is different.

Posted: 28 Jun 2006, 12:12
by toomanytoys
Er, I thought DJ rings were thinner than the others.. MV/SS etc, were thought to be the same as the DG ones.. But I know not

Posted: 28 Jun 2006, 13:37
by T'Onion
looks like everybugger is confused ..
think i'll phone vw and get even more confused :?

Posted: 28 Jun 2006, 13:40
by Mocki
i got my set from Nottingham Vw center, and they ARE NOT the same, side by side they are different......

try nottingham VW center.

Posted: 28 Jun 2006, 18:53
by toomanytoys
Steve, were that for a DJ or MV/SS engine? I was convinced it was only DJ different.. :?

Posted: 28 Jun 2006, 19:44
by T'Onion
ok after speaking to gilder vw sheepfield
the 1.9dg are differant to the 2.1 DJ /MV/SS which are the same according to the part numbers!!
i've spoken to europarts again in the land of sheep who are looking into it and getting back to me hopefully tomorrow regarding what it says on thieir web catalogue ( item no 307550551 if you fancy confusing ya'sens)

will keep you informed :roll: