Club 80-90 Forums

hi i have noticed that alot of people use the saab 900 seats to fit to there vans.is this because these are a close match to the original seats and easier to fit or just for general comfort.are there any other seats that are good quality and comfort that are easier to fit to the t25,thanks dave

I was going to fit saab seats , after looking in the wiki at seat choices I saw that MR2 seats were a even easier soloution.

I picked up a pair of ebay for £40 which were in pretty good nick , followed the guide in the wiki . Think it took 3 or 4 hours to do max (with a fractured arm).

there really comfy and the same height as standard seats



James

excellent

I've just fitted 9-3 seats to mine, but as I'm 6'3" and needed all the legroom I could keep, I...didn't follow the Wiki!

I drilled out the standard rails and fitted the seats direct to the box [after some expert advice from metalmick8y that is ).

High-backed and sooo comfy!!

Hi there, regarding the mr2 seats, im looking at a couple on ebay and was wondering which mark they were (mk1,2, 3?)
Many thanks,
Allan.

Saab 9000 seats sit a bit higher even with the height adjusting mechanism removed from the drivers seat. The missus couldn't put her feet on the floor with one of those seats on a swivel base. She is 5ft 7

I had them in for 3 years but then reverted back to captains. That's the beauty of the wiki method of fitting it's fully reversible as you have left the runners in.