Page 1 of 1
Flooring
Posted: 22 May 2011, 08:31
by jpee
Hi all
Interested in peoples thoughts on fixing down a new ply floor in the van. Screw it down or a grab adhesive like No Nails ?
Cheers
Re: Flooring
Posted: 22 May 2011, 10:27
by jpee
Went with screws. Self tappers dead easy
Re: Flooring
Posted: 22 May 2011, 20:53
by billybigspud
3.0 x 15mm rivets and drill through the high points in the floor. counter sink it with a 10 mm bit slightly so it wont show through ya new flooring. no need to go mad with then either
.
use 6mm external ply. it bends down to meet your sliding door trim perfectly.
jamie
ignore that, just sen you answered your own question.
