Page 1 of 1

Water hose size

Posted: 05 May 2011, 10:28
by Zebedee
Some of the water hoses (specificially the ones going to the bleed rail) are a little cracked on my DG engined caravelle and need replacement.

What internal size are they? Etka doesn't show the sizes (at least not that i could see).

Re: Water hose size

Posted: 05 May 2011, 18:33
by Mocki
do you mean the smallest ones? 6mm id
i think the bigger one is 17mm id

someone will be along to correct me i have no doubt.

Re: Water hose size

Posted: 05 May 2011, 20:19
by Ian Hulley
:lol:

Sounds about right to me :mrgreen:

Re: Water hose size

Posted: 06 May 2011, 10:27
by Oldjets
Zebedee
What year is yours? I'm just about to change the small hoses that connect into the plastic bleed rail on my 1990 DG. If I remember correctly they are 7mm ID x 2.5mm wall. I've just ordered a couple of metres from VAG so should have some spare if you need it.

Oldjets

Re: Water hose size

Posted: 06 May 2011, 17:59
by Zebedee
Mines a 1988. I need to pop into my VW main stealer tomorrow so i'll get some while i'm in there. Thanks for the offer though. :D