Club 80-90 Forums

Hi Guys,

I am starting to think about security in my van. Let's face it these are an absolute gem for thieves to break into

One thing I was considering was a small electronic safe on the floor inside one of my cupboards with few small welds to hold it in place. Can then be used for valuables, passport and even ignition key if I decide to get a pissed nights kip in so plod won't accuse me of intention to drive.

Anyone done this before? Recommend a safe?

Thanks

better to rivnut and bolt it i would have thought.
tidier too...

Was just considering small 1 inch weld on each side?

To rivet I guess id have to drill through save and floor pan?

was thinking blind rivnuts rather than pop rivits, which a screwdriver used as a lever would rip out..... but you could remove it if you wanted with rivnuts and bolts. three holes would be less mess than welding tho....

Unfortunately I don't know much about riveting etc other than when at school we used little rivet gun to hold our DT made coat hanger parts together lol

If you get some time could you post a link to what product you mean and brief explanation.

Cheers

bmouthboyo wrote:Unfortunately I don't know much about riveting etc other than when at school we used little rivet gun to hold our DT made coat hanger parts together lol

If you get some time could you post a link to what product you mean and brief explanation.

Cheers

2 second search.................................http://www.aimfasteners.com/about_rivnut.html

jamesc76 wrote:

bmouthboyo wrote:Unfortunately I don't know much about riveting etc other than when at school we used little rivet gun to hold our DT made coat hanger parts together lol

If you get some time could you post a link to what product you mean and brief explanation.

Cheers

2 second search.................................http://www.aimfasteners.com/about_rivnut.html

Thanks for that grumps

They look ideal as at least I can then remove it if I wish.

I assume I would need to drill 3 holes from inside the safe unless it has some pre drilled.

mine is welded, just a good strong box with a tuff lock in an unaccesable place!

dunno how big your safe is, but i'd guess you;d need to drill tree holes from outside the safe, unless you have a small drill or a big safe?????

use bolts down through the safe floor, onto rivnuts into van floor.......so you cant get to bolt heads unless safe is open

my safe is my wifes handbag i cant get in it!!!!!!!! let a loan enyone ells
keith