Page 1 of 1
Need to drill out bolt holes on pentas
Posted: 30 Apr 2011, 11:32
by pat_6_4
Hi
Bought some pentas but the bolt holes are too small.
Is it an easy job to drill them out bigger? Only needs a slight expansion.
Any advice given greatly received
cheers
Re: Need to drill out bolt holes on pentas
Posted: 02 May 2011, 21:27
by billy739
dont think anyone will put there name to a definate answer for liability issues
but i will confirm it has been done many times, using the correct size drill.
BUT DO IT AT YOUR OWN RISK
Re: Need to drill out bolt holes on pentas
Posted: 05 May 2011, 18:13
by jamesc76
do you have access to a large pillar drill to keep everything exactly square? The slightest bit wrong will end up in bad times!!!
Re: Need to drill out bolt holes on pentas
Posted: 05 May 2011, 20:48
by pat_6_4
Thanks guys
Decided to take them to an engineering shop.
They can crack on with it