Club 80-90 Forums

Can anyone give me some advice on replacing the front handbrake cable please. I've had a good read through some past threads but I can't work out if it is a tank down job or not?

Mr Haynes has it as a simple ... undo this, that and the other and pull it through, but in the real world it's not that simple, I can get it to move about 3 inches either way but it will not withdraw.


thanks in advance.

you've checked the wiki pages?

https://club8090.co.uk/wiki?ti ... rake+cable" onclick="window.open(this.href);return false;

Sure have ... unless I blatantly missed something!

It probably is REALLY simple when the tank's off which is a BARSTEWARD of a job unless you have twig-like arms and broken fingers.

Ian

Couldn't get it out despite best efforts and finally ran out of time but not before coming up with this as a repair job for the snapped cable



Made out of an old piece of M6 threaded rod and a wood screw insert with the thread ground off used to join the two together!

I posted some of these out 4 or 5 years ago