Page 1 of 1
fitting an ati roll bar link
Posted: 18 Apr 2011, 16:54
by gypo
Does anyone have any tips on fitting one of these, its the straight one i dont know if it makes a difference? i have heard they are awkward to fit?
Any tips please?
cheers
G
Re: fitting an ati roll bar link
Posted: 18 Apr 2011, 17:05
by armyphil
Plenty of lube and I found putting them in hot water helped it softened them up
Re: fitting an ati roll bar link
Posted: 18 Apr 2011, 19:16
by cygnak
As Phil said. I also found it easier putting the bush halfway on the arm and then pushing the link on.
Re: fitting an ati roll bar link
Posted: 18 Apr 2011, 19:39
by gypo
ok thanks boys.
cheers
G
Re: fitting an ati roll bar link
Posted: 19 Apr 2011, 09:29
by martbass
Hi Gypo
I've just done one of mine.
I sloshed swarfega soap over the bush after It was pressed it in to the arb link .....a bit of wangling and it slipped onto the anti roll bar...... it worked a treat!
Re: fitting an ati roll bar link
Posted: 19 Apr 2011, 20:02
by gypo
Cheers all for the advice
G
