Page 1 of 1
Need a new Clutch
Posted: 30 Mar 2011, 16:44
by sharkjazz
Evening all, have just got back from a rather ill advised attempt at some off road driving up in the Himalaya. Managed to smash a hole through the oil tank
(been welded fixed) and did some unknown damage to the clutch trying to get over a steep bit of washed out road. The clutch was smelling really bad afterwards and on the journey back it felt like it was slipping when trying to move off in 1st.
Anyway, the question is, is the clutch for a 1988 LHD Westfalia specific to this type of van, or is it a standard VW part. Am going to be calling the Katmandu VW dealer but want to have some information to hand as I don't think they have any T25s here.
Many thanks
Martin
Re: Need a new Clutch
Posted: 30 Mar 2011, 16:46
by Ian Hulley
Engine type ?
Re: Need a new Clutch
Posted: 30 Mar 2011, 19:21
by armyphil
I Imagine it's a 1.6TD and it is vw specific I haven't got vagcom for the part number so hopefully someone should along soon to help
Re: Need a new Clutch
Posted: 30 Mar 2011, 19:24
by kevtherev
Is it a syncro?
Re: Need a new Clutch
Posted: 30 Mar 2011, 19:38
by Oldiebut goodie
If you can't find one out there - there is always the possibility of having it relined - some of these out of the way places have some very ingenious mechanics (they have to be!).
Re: Need a new Clutch
Posted: 30 Mar 2011, 19:43
by Oldiebut goodie
Checking back on his posts - it's a 1.6 na diesel.
Re: Need a new Clutch
Posted: 30 Mar 2011, 21:00
by Hacksawbob
Brickwerks has the same clutch for all diesels 215mm
http://www.brickwerks.co.uk/shop?page=s ... ord=clutch
Etos says:
068 198 141 DX is the clutch set of three parts
or individually
068 141 025 DX is the pressure plate
068 141 035 PX Clutch plate
Looks like release bearing is the same for them all
091 141 165 D
Re: Need a new Clutch
Posted: 01 Apr 2011, 11:34
by sharkjazz
Sorry for not including the engine type, it is a 1.6td. I believe I have posted somewhere else it was a 1.6, (which is what I thought I bought) but turns out it was a TD.
It isn't a syncro.
thanks for all replies
Re: Need a new Clutch
Posted: 02 Apr 2011, 08:22
by jed the spread
If it was a Syncro you wouldnt have had the engine bashed,
There is loads of stuff on them to protect vital bits.
jed
Re: Need a new Clutch
Posted: 06 Apr 2011, 07:13
by sharkjazz
jed the spread wrote:If it was a Syncro you wouldnt have had the engine bashed,
There is loads of stuff on them to protect vital bits.
jed
yes I know that now. Turns out the standard is quite underprotected in the vital bits and also sits low ready to scrape any and everything
Turns out nothing can be done and will have to order the clutch from brickwerks and get it sent (ouch to international shipping rates
). Am off to to Tibet / China next so need to have it all in tip-top shape.