Club 80-90 Forums

Posted: **28 Mar 2011, 17:07**

Hi, i have been offered a set of standard T5 wheels. Will they fit onto a T25?

Posted: **28 Mar 2011, 19:20**

No

112 pcd
39 to 30 ET... is what you are looking for

From Brckyard

Audi A4, A6, A8, V8, S2, S4, S6 and recent Passat and Sharan and T4 have the required PCD but the centre bore seems to be quite small at 57.1mm .ET35-45.
Mercedes, loads of choice here, obviously I can't go through all the types available as there is absolutely loads. Be aware that some Mercs came with 12mm (M12) wheel fittings and not M14 wheel fittings required for the T3, so drilling out the wheel bolt holes is not an uncommon operation.
Ford Granada/Scorpio, believe it or not the humble grandad has something good about it, its wheels, again loads of choice and there's some nice 16" ones kicking around from the 24 valve Cosworth. ET 35-38.

Posted: **29 Mar 2011, 11:43**

kevtherev wrote:
39 to 30 ET... is what you are looking for

Remember those are just guide ET's Kev based on standard T25 5.5" and 6" wheels.

For example 8" wide alloys with ET38 don't fit without using 10mm spacers.

But there's plenty of info on here and the 'Yard of what fits and what's needed to fit them.

Posted: **27 May 2011, 17:28**

anyone use the adaptor's to fit different pcd? i would like to run t5 steels!

Posted: **27 May 2011, 19:52**

dirty-syncro-lover wrote:anyone use the adaptor's to fit different pcd? i would like to run t5 steels!

Yes plenty.

Club 80-90 Forums

Will T5 Wheels Fit a T25?

Will T5 Wheels Fit a T25?

Re: Will T5 Wheels Fit a T25?

Re: Will T5 Wheels Fit a T25?

Re: Will T5 Wheels Fit a T25?

Re: Will T5 Wheels Fit a T25?