Page 1 of 1
removed idle cut off solenoid did i put it back ok?
Posted: 23 Mar 2011, 21:14
by elmo makaroy
ive just had to remove the idle cutoff valve from my van to see if its working properly, now ive just screwed it back in and i cannot remember how it was screwed in the first time, does it matter how it goes in or does it just have to be screwed in any way?
cu engine right handside carb
Re: removed idle cut off solenoid did i put it back ok?
Posted: 23 Mar 2011, 21:15
by R0B
Not doing very well with that van.Are you mate
Re: removed idle cut off solenoid did i put it back ok?
Posted: 23 Mar 2011, 21:18
by elmo makaroy
im getting ther slowly but surely but by now ive been under my van so many times and had alot of the parts in bits in front of me so im confident that its all good and atleast im getting used to fixing my own van
Re: removed idle cut off solenoid did i put it back ok?
Posted: 24 Mar 2011, 09:58
by elmo makaroy
does any1 know the answer to this please?
Re: removed idle cut off solenoid did i put it back ok?
Posted: 24 Mar 2011, 12:48
by ermie571
Seeing as mine was held in with an elastic band when I had my cu....the fact that it screws in and stays there must be a bonus!!
Mine screwed in.....but gradualy came lose while driving....was an interesting driving experience....
I wish I could answer your question properly.....but as far as I remember it simply screwed in.
Sure one of the Aircooled boys will be along for a proper answer!
Em
x
Re: removed idle cut off solenoid did i put it back ok?
Posted: 24 Mar 2011, 15:40
by BOXY
It just screws in. Don't go mad and try to put it in too tight because it's a fine thread and it'll strip easily.