Page 1 of 1
tin wear
Posted: 20 Feb 2011, 21:33
by lhd
I have a peice of tin wear/heatshield, what ever you call it is missing from the offside. Is this the same on a syncro as a 2wd?
cheers Rob.
Re: tin wear
Posted: 20 Feb 2011, 22:02
by axeman
think that it is the same as 2wd, if you mean the parts that sort of flair down and join on to the silencer tin wear,
neil
Re: tin wear
Posted: 20 Feb 2011, 22:08
by lhd
Yeah thats the bit, without it the exhaust one is flailing around.
Thanks Neil.
Re: tin wear
Posted: 20 Feb 2011, 23:15
by syncropaddy
I dont think any of the 2wd shields are the same as a Syncro. Just spent about 20 mins checking EKTA
Re: tin wear
Posted: 20 Feb 2011, 23:46
by lhd
I couldn't see anything for the 2wd only the syncro, I spent ages looking the other night.
That's why I asked.
Rob.
Re: tin wear
Posted: 20 Feb 2011, 23:48
by lloydy
I've got the complete set, if you want to measure them up, to get it made?
Re: tin wear
Posted: 21 Feb 2011, 00:00
by lhd
lloydy wrote:I've got the complete set, if you want to measure them up, to get it made?
What for a petrol syncro?
Rob.
Re: tin wear
Posted: 21 Feb 2011, 07:42
by Aidan
chances are it'll be the same one, the rare 2wd variants are just that, rare, so mostly they use the suffix A one same as syncros upto early 88, the change then is pretty small, delete one fixing iirc, the left one is the same with a bit cut off which gives it a different suffix
Re: tin wear
Posted: 21 Feb 2011, 07:49
by lloydy
lhd wrote:lloydy wrote:I've got the complete set, if you want to measure them up, to get it made?
What for a petrol syncro?
Rob.
Diesel, sorry thought yours was diesel