Page 1 of 1

Source of parts for 1.6 JX engine rebuild

Posted: 03 Feb 2011, 14:53
by richard17777
Hi,

I have just taken the 1.6TD JX engine out of our van and am sending it off to a local firm (macclesfield) for a rebuild. They seem to be having a problem finding the rings and mainbarings for the job. Does anyone recommend a supplier where I can get all the parts from? It may just be better for me to get them in a bundle and pass to them.

Thanks and regards,

Richard

Re: Source of parts for 1.6 JX engine rebuild

Posted: 03 Feb 2011, 20:33
by Plasticman
Sorry Richard but I would be very wary of an engine rebuild company that couldnt source such items,
Have they done one before?
mike

Re: Source of parts for 1.6 JX engine rebuild

Posted: 03 Feb 2011, 20:44
by pocolow
Who in Macclesfield is doing the rebuild???as I live there.

Re: Source of parts for 1.6 JX engine rebuild

Posted: 03 Feb 2011, 20:50
by R0B
Is it croft engine services?

Re: Source of parts for 1.6 JX engine rebuild

Posted: 03 Feb 2011, 20:53
by pocolow
R0B wrote:Is it croft engine services?
Do you know anything about Croft Rob??

Re: Source of parts for 1.6 JX engine rebuild

Posted: 03 Feb 2011, 21:02
by R0B
I have heard nothing of them for ages.a mate used to work for them.and they had a very good reputation then.you could spit from your house to where they are.Just off brown st.On barton st..

Re: Source of parts for 1.6 JX engine rebuild

Posted: 03 Feb 2011, 21:07
by pocolow
I walk past them everyday..always busy, will keep them in mind .Ta Rob

Re: Source of parts for 1.6 JX engine rebuild

Posted: 03 Feb 2011, 22:09
by syncroandy
Tony Walsh should be able to supply any parts needed: http://www.vwenginerecon.co.uk/.

I did a GTD motor a cople of years ago and had no problem getting KS shells etc.

Andy

PS. I think I have NOS sets of inlet and exhaust valves, PM if interested.

Re: Source of parts for 1.6 JX engine rebuild

Posted: 03 Feb 2011, 23:14
by Plasticman
Stick some 'rimflow' valves in.
mike

Re: Source of parts for 1.6 JX engine rebuild

Posted: 04 Feb 2011, 19:37
by richard17777
Hi, thanks for coming back to me - it is croft as it happens. Said that their supplier could find all the parts but the main bearings. little odd but there you go.
Just deciding if i want to do just the head at this point or the whole lot. When we bought it early last year it wasn’t drinking any oil but black smoked like the fuel pump had been turned up. After a trip around Europe it got a bit more thirsty on oil. We are doing her up at the moment and the engine is out – i was hoping to just do what was needed on the engine with the hope of doing a TDI conversion in a few years time.
Any other ideas in the Macc/south Manchester area welcomed.

Re: Source of parts for 1.6 JX engine rebuild

Posted: 04 Feb 2011, 19:45
by richard17777
sorry Andy, missed your post. have just mailed them - thanks for the heads up.

Re: Source of parts for 1.6 JX engine rebuild

Posted: 04 Feb 2011, 21:01
by pocolow
Turns out that a garage I used to fix a snapped cam-belt on my Audi A6 a few years back got Croft to rebuild the engine for them. Ran sweet after the rebuild , so it seems they are good.

Mark