Page 1 of 1
On Pistonheads
Posted: 14 Nov 2010, 16:04
by syncropaddy
Re: On Pistonheads
Posted: 14 Nov 2010, 16:14
by jed the spread
The owner has posted on here a coupe of times. I nearly bought that van from Tristar Patrick when I was looking for my Doka but the 16" bit put me off in the end.
jed
Re: On Pistonheads
Posted: 14 Nov 2010, 17:03
by Aidan
not far from me
Re: On Pistonheads
Posted: 14 Nov 2010, 17:05
by T'Onion
m.u.s.t.s.t.o.p.l.o.o.k.i.n.g
Re: On Pistonheads
Posted: 14 Nov 2010, 17:18
by Russel
I looked at this one a few years ago when i was looking for a 16 doka but it needed panels replaced and very rough around the edges. Not wot i was after.
Been for sale from the precent owner for a long time now.
Reasonable price if you are after a resto project. " if it hasn't deteriorated since i looked at it"
Russel
Re: On Pistonheads
Posted: 14 Nov 2010, 17:35
by syncropaddy
Russel at Syncro-Nutz wrote:I looked at this one a few years ago when i was looking for a 16 doka but it needed panels replaced and very rough around the edges. Not wot i was after.
Been for sale from the precent owner for a long time now.
Reasonable price if you are after a resto project. " if it hasn't deteriorated since i looked at it"
Russel
Probably explains the low price ...
Re: On Pistonheads
Posted: 14 Nov 2010, 19:44
by Aidan
syncropaddy wrote:
Probably explains the low price ...
that and the need to fix the brakes and other bits in order to get an MOT so it can be registered in the UK and with the paperwork being in sellers name that'll be a bit of fun
seller has previously contacted me about a gearbox rebuild, IIRC he was planning to TDi it too
the green ones on ebay look better buys if you are shopping and nice colour too