Page 1 of 1
Fitting 1.9 TDI engine
Posted: 11 Nov 2010, 21:59
by peterbutler
Has anybody had experience of fitting a TDI turbo engine into a T25? If so whats involved and how complicated is it. At the moment mine has an automatic gearbox with non turbo 1.9 diesel. I would like to keep the automatic as I am disabled. Anyone got any ideas and from which doner vehicle would be suitable to obtain an engine?
Re: Fitting 1.9 TDI engine
Posted: 12 Nov 2010, 07:42
by Aidan
Peter the T3 didn't come with auto and diesel so yours must be a conversion, I'm guessing there's an adapter plate involved, you need to be sure about what you've got, what engine it is and where it came from and how the auto set up is operated before even trying to change engine because it's a bit unique
Re: Fitting 1.9 TDI engine
Posted: 12 Nov 2010, 09:02
by peterbutler
Thanks Aiden mine is a 1Y engine as far as I know but not too sure about the gearbox. The guy I purchased it off had it put in.
Peter
Re: Fitting 1.9 TDI engine
Posted: 13 Nov 2010, 23:10
by ..lee..
sounds like an interesting van