Page 1 of 2
Wish me luck...
Posted: 05 Nov 2010, 19:19
by Essex Nige
Well tomorrow is the big day, all i need to do is fill the syncro's new AAZ with water and oil and fingers crossed it'll start, so wish me luck
Re: Wish me luck...
Posted: 05 Nov 2010, 19:20
by eatcustard
good luck
Re: Wish me luck...
Posted: 05 Nov 2010, 19:26
by lloydy
good luck
Re: Wish me luck...
Posted: 05 Nov 2010, 21:29
by silverbullet
Well it is an oil-burner, but all the best anyway battery fully charged?
Re: Wish me luck...
Posted: 05 Nov 2010, 21:46
by Essex Nige
silverbullet wrote:Well it is an oil-burner, but all the best anyway battery fully charged?
Indeed it is, and i have a spare standing by too
Re: Wish me luck...
Posted: 05 Nov 2010, 23:12
by Simon Baxter
Remove the retrun line from the pump at the filter.
use a vacuum pump and draw fuel up and fill the pump.
sTICK YOUR PINKY OVER THE OPEN TAIL ON THE FILTER.
I hate caps lock me.
Hey presto injection pump full of fuel, hard bit done.
Just remember, it could be much worse, you could own a WBX.
Re: Wish me luck...
Posted: 06 Nov 2010, 06:21
by Dai
good luck
Simon Baxter wrote:
Just remember, it could be much worse, you could own a WBX.
Yep ill vouch for that
Re: Wish me luck...
Posted: 06 Nov 2010, 07:28
by Essex Nige
Simon Baxter wrote:Remove the retrun line from the pump at the filter.
use a vacuum pump and draw fuel up and fill the pump.
sTICK YOUR PINKY OVER THE OPEN TAIL ON THE FILTER.
I hate caps lock me.
Hey presto injection pump full of fuel, hard bit done.
Just remember, it could be much worse, you could own a WBX.
luckily i have a hand pump fitted (like the ones you get on an outboard motor fuel tank) zero faff
Re: Wish me luck...
Posted: 06 Nov 2010, 09:30
by syncropaddy
Well then ..... its 09.30 ...... did it start?
Re: Wish me luck...
Posted: 06 Nov 2010, 09:32
by Essex Nige
syncropaddy wrote:Well then ..... its 09.30 ...... did it start?
Oh god you're as bad as her indoors... on my way out right now...
Re: Wish me luck...
Posted: 06 Nov 2010, 15:43
by Essex Nige
Well she lives, of sorts, started but now has a knock that wasn't there before... and once warm the oil light flashes which i'm taking is oil temp?
oh and i think i might have put the clutch plate in back to front cos the clutch harldly works, but apart for that everything is fine and dandy
Re: Wish me luck...
Posted: 06 Nov 2010, 18:07
by ..lee..
oil light flashing is not oil temp. it a pressure loss warning...... doesn`t sound good.
Re: Wish me luck...
Posted: 06 Nov 2010, 18:15
by ringo
Dont panic yet...
Recheck the timing. If its even half a tooth out it will sound "pooh" and not work properly....
Ringo
Re: Wish me luck...
Posted: 06 Nov 2010, 18:32
by Essex Nige
Ringo, timing wasn't touched Russel from syncronutz says it's No 4 con rod balance weight is catching your oil pump pick up tube...
Re: Wish me luck...
Posted: 06 Nov 2010, 18:50
by ringo
Sorry Nige - I've not followed your previous posts.
That's good news then. Apart from having to take the sump off of course.
Ringo