Page 1 of 1
can i ?
Posted: 30 Oct 2010, 16:32
by old korky
can i swap an 1.9 dj instrument panel with a 2.1 dj one. the 1.9 has a rev counter, the 2.1 has a clock,would there be a wire in the loom for the rev counter as standard on the 2.1,or is that hoping to much any help would be greatfull
Re: can i ?
Posted: 30 Oct 2010, 16:48
by andisnewsyncro
Pretty sure the pcb is different in the 2 setups, when I bought a new one I was asked if mine (2.1DJ) had a rev counter or not. Also depends on the age of the vehicle I think. Not 100% sure on the loom and what will be in place but have a look on vagcat for the relevant ages of the 2 units and see if they have different codes, it might help you out a bit.
Re: can i ?
Posted: 30 Oct 2010, 20:21
by old korky
thanks i will try to see if they match,i have both buses,its just on the 2.1 the one i use the dash lights go out when i turn the lights on,also the headlight warning light is on when they there not and off when they on? just a note the 1.9 is Greg the 2.1 is Hreg