Page 1 of 2
t25 Viking
Posted: 27 Oct 2010, 19:28
by fryup
I bought a Viking earlier in the year and in the roof there are no cushions up there. can somebody with a viking help me.
Re: t25 Viking
Posted: 27 Oct 2010, 20:33
by armyphil
Do what?
Size, colour, what you need? Pictures?
Re: t25 Viking
Posted: 27 Oct 2010, 20:44
by kevtherev
I think someone with a viking could measure the mattresses, Daz watson has a Viking he may spot this and get his tape out.
Re: t25 Viking
Posted: 28 Oct 2010, 05:19
by fryup
I need some sizes and shapes of the cushions so that I can get some made up to fit. And pictures would help too.
Cheers Andy
Re: t25 Viking
Posted: 28 Oct 2010, 10:01
by Steve P
Hello mate, is this the sort of thing you are after.....
Single bed cushion
Double bed
You can see that each "bed" needs 3 cushions to enable them to be folded. When I get rid of my visitors I'll go out and measure the sponge
Re: t25 Viking
Posted: 28 Oct 2010, 10:08
by fryup
Thanks that would be brilliant
Cheers Andy
Re: t25 Viking
Posted: 28 Oct 2010, 11:03
by Steve P
As promised here are the approximate sizes of the sponge.
It's all 4.5 cm thick, hope it's what you were after.....
Re: t25 Viking
Posted: 28 Oct 2010, 17:17
by fryup
Thanks for that Just wondered if you could help me out with one other thing, in the picture where the arrows are is there meant to be wood or cushions because you can see the canvas.
cheers Andy
Re: t25 Viking
Posted: 28 Oct 2010, 19:18
by Steve P
Are you talking about the part of roof that overhangs the sliding door? If you are, we have material.
Re: t25 Viking
Posted: 28 Oct 2010, 19:39
by fryup
Yes I am ok thanks for all the help. Another question I have that you may able to help me with is I have a hole in the cupboards and I know that a fridge should go there do you have a fridge, and if you do what make and model is it.
Cheers Andy
Re: t25 Viking
Posted: 28 Oct 2010, 20:27
by Steve P
We had to replace our old tired one with something a bit better, but it was too big for the hole so I had to turn carpenter and make it fit.
Trouble is I cant remember the model number, I'm sure it was a Electrolux RM123
Re: t25 Viking
Posted: 30 Oct 2010, 07:54
by dazwatson
kevtherev wrote:I think someone with a viking could measure the mattresses, Daz watson has a Viking he may spot this and get his tape out.
Thanks Kev, just spotted this thread, looks like Steve has sorted it out, my lay out is the same.
Any more questions
Re: t25 Viking
Posted: 30 Oct 2010, 07:56
by kevtherev
what about your fridge Daz.. this fella wants to put one in but doesn't know which model no. it is
any clues?
Re: t25 Viking
Posted: 30 Oct 2010, 21:03
by Steve P
Found a pic of the model fridge that we had, this pics from another van. Might jog someone's memory.

Re: t25 Viking
Posted: 31 Oct 2010, 09:55
by kevtherev
hmmm that does look like an RM122
Here's a fitting manual and some operating instructions.. all provided by your fabulous club!
If you scroll down there's some dimensions
RM122 refrigerator