Page 1 of 1
16" Audi A3 Wheels
Posted: 03 Oct 2010, 07:31
by mearnsy
Hi will these fit on a t25? If so do they need spacers or boring out etc?
Re: 16" Audi A3 Wheels
Posted: 03 Oct 2010, 08:37
by poshbuggers
Depends on the age of them. Early A3's were 5x100 (same as some Golfs) and won't directly fit a T3. Later models went to 5x112.
Re: 16" Audi A3 Wheels
Posted: 03 Oct 2010, 16:49
by spet25
I have A3 on mine, There need boring out on the front and spacers front and rear.
Re: 16" Audi A3 Wheels
Posted: 03 Oct 2010, 19:36
by mearnsy
spet25 wrote:I have A3 on mine, There need boring out on the front and spacers front and rear.
is that a costly job to have them bored out?
Re: 16" Audi A3 Wheels
Posted: 03 Oct 2010, 20:09
by spet25
If I'd of known the hassle when I started I wouldn't off done it. Boring larger holes was the small part getting the rear hub nuts off was a ball ache. I had to hire an impact drive as a scaffold pole wouldn't move them. Then getting longer studs pressed in. Longer bolts on the front also. Unless your desperate then look for easier ones. I think you can get easier to fit alloys