Page 1 of 1
Front suspension bushes
Posted: 24 Sep 2010, 18:38
by slobbo
Right Van failed on perished ARB bushes so while they have things apart I am going to get the garage to replace all the front end bushes. So what do I need?
I have already
- Upper wishbone bushes
- Powerflex lower arm bushes
What else do I need?
Baxters picture is missing from his site so I can't even guess from that.
Oh and any tips for difficult bits of the job I can tell the garage?
Re: Front suspension bushes
Posted: 24 Sep 2010, 20:16
by syncrosimon
ARB chassis rubber mounts, steering rack mounts and ball joints and the donuts on the lower arm and stainless sleeve from baxter.

Check front shock lower bush.
Oh and your steering coupling rubber bits.

Re: Front suspension bushes
Posted: 24 Sep 2010, 20:35
by Simon Baxter
Site back up, it's a bit flakey but it is there now.
It's also verrrrrrrrrrrrrrrrrrrrryyyyyyy slow, and the check out doesn't work properly, which is great.
At the moment, if you use firefox it works, if you use IE it doesn't.
I believe it's now set so you can place an order but not pay for it, if you get this far we'll ring for card details.
Re: Front suspension bushes
Posted: 25 Sep 2010, 02:57
by Justavan
Rotten Luck Rob,
You've had to spend a lot of Wonga on that bus of yours...... Should have kept Rusells Red Bus.
If its any consolation my Old Red Doka sailed through its MOT just needed a dash light bulb to get a PASS...............
Re: Front suspension bushes
Posted: 25 Sep 2010, 08:03
by Yozza
I'm doing a lot of this work at the mo. There is another bush (and surrounding bits) that may be worth replacing (mine were FUBAR). The damper bush which mounts at the top of the damper above the chassis. For part numbers - >
Rust Crumble
ps Fit the power flex lower arm bushes, as the originals are a b'stard (learnt the hard way )
Re: Front suspension bushes
Posted: 25 Sep 2010, 10:31
by ..lee..
Possibly new bots and nut for the inner bottom arm bushes. Had to cut mine out.
Re: Front suspension bushes
Posted: 26 Sep 2010, 07:41
by slobbo
Knocked this up (well numbered bits). Who can tally the numbers with what they are called on Brickwerks. And which bits are syncro only and which are common with 2wd. Which is the ARB Upper drop link which comes in 3 sizes? What have I missed?

Re: Front suspension bushes
Posted: 26 Sep 2010, 08:50
by syncrosimon
1. Shimms not listed, but Aidan has some, and poss still available through VW or Special Parts German suppliers. Syncro specific (only needed if lateral play exceeds 0.5mm)
2. Wishbone bush T3 upper. 2wd and syncro
3. T3 Radius bush inner, outer, and sleeve. 2wd and syncro
4. Powerflex arb mounts D bush late 19 or 21 mm ( expect 21mm cant remember) 2wd and syncro
5. Powerflex arb link lower bush. 2wd and syncro
6. As above kit ,comes with enough.
7. ARB drop link upper bush. 2wd and syncro
8. Not available (?) havent looked for them though elsewhere. Syncro specific.
Re: Front suspension bushes
Posted: 26 Sep 2010, 08:52
by syncrosimon
Plus your lower control arm.

Re: Front suspension bushes
Posted: 26 Sep 2010, 10:50
by slobbo
Thanks Simon. Updated the image with the lower control arm bushes. That would be 9.
Is this picture and text a candidate for the wiki?
1. Shimms not listed, but Aidan has some, and poss still available through VW or Special Parts German suppliers. Syncro specific (only needed if lateral play exceeds 0.5mm)
2. Wishbone bush T3 upper. 2wd and syncro
3. T3 Radius bush inner, outer, and sleeve. 2wd and syncro
4. Powerflex arb mounts D bush late 19 or 21 mm ( expect 21mm cant remember) 2wd and syncro
5. Powerflex arb link lower bush. 2wd and syncro
6. As above kit ,comes with enough.
7. ARB drop link upper bush. 2wd and syncro
8. Not available (?) havent looked for them though elsewhere. Syncro specific.
9. Lower Control Arm Bushes - Powerflex replacement available from Brickwerks.
Am I right in thinking that 8. is this lot?
cover cap for nut, essential 251 413 437
nut m10x1 N 011 011 5
plate for damping ring (big fo washer) 251 413 431
damping ring 701 513 121
bush inside damping ring 251 413 439 C
then it's the chassis
underneath is 251 411 123 F which is the rubber bumpstop on top of the dust cover 113 412 305 01C
Re: Front suspension bushes
Posted: 26 Sep 2010, 19:00
by Simon Baxter
We will re-do the syncro section on the webshop, might even start tonight, I know you syncro owners are easily confused...
Re: Front suspension bushes
Posted: 26 Sep 2010, 19:44
by Simon Baxter
In progress.
Section getting tidier
Off to make Pizza Toast, this beer has set me off..
When it's riddle with mistakes, blame the beer!
Re: Front suspension bushes
Posted: 26 Sep 2010, 19:47
by HarryMann
Good stuff Simon...
You know we apprecaite it
How you off for fruit conserves these days...
===========
Yes Rob, thats a candidate I guess, will spend some time soon updating, ta!
Re: Front suspension bushes
Posted: 26 Sep 2010, 20:25
by taigagreen
Simon Baxter wrote:We will re-do the syncro section on the webshop, might even start tonight, I know you syncro owners are easily confused...