Club 80-90 Forums

Ay up,
I'm after more help/answers (sorry to be so demanding - 2 questions in 2 nights) Vanfest is coming up and I need to know what's going on the shopping list

I'm putting the front end back together after some extensive work and when I've re-assemble the tie-rods onto the steering rack I noticed that the near-side end of the rack is badly pitted and has lateral movement both up/down and front/back within its aluminium housing. Assuming this isn't normal? Can the racks be re-furbished (replace bushes etc) or is it not as simple as that? Let me guess... the latter?

Cheerz

yes bushes can be changed.

thanks for reply, are you referring to the bushes which mount the rack to the vehicle? Or the bushes within the steering rack housing?

no inside the rack housing there is a support bush that stops the rack moving away from the pinion in effect. these can be changed.

http://www.barpropshafts.co.uk/" onclick="window.open(this.href);return false;

these people do all my stuff. very nice people.

Thanks for the link lee, I'll buzz em tomorrow. Out of curiosity, have you tackled this job yourself? If so, is it a barsteward?

Have not done a t3 one my self but bar props are so good to me it's not worth the effort. Rose will answer the phone and Andy or one of his boys will do the job. Tell them Lee in freds sent you.