Club 80-90 Forums

I have the standard Vacuum Advance Dizzy fitted to my 2000cc Aircooled bus.

Just doing some final tuning, following a high rev misfire....so had dicided to change the coil, dizzy cap, arm, points etc.

Looking at the distributor I dont seem to have a condenser fitted to the outer body. Obviously removed in the past. I have a new one so want to fit it, can anyone help with the wires, there are two one that fits into the body of the dizzy and one longer one...

Mines a 2000cc Aircooled but it has electronic ignition.
When i got it somebody had converted to the old points and condenser. its well worth hunting the parts to upgrade to electonic, However this is a matter of opinion, There are a few peeps on here that use the points and condenser.

hope this helps