Club 80-90 Forums

are GSF plug leads any good , or are b/werks better . as thay are the same price.and how can you tell when
thay want changing

Depends on the brand each supplier is selling? you need to ask.
Generally leads do not need changing unless there is evidence of tracking or missfiring under load (same goes for distributor cap and rotor arm BTW) tracking is best seen from cold on a damp day, very short/small arcs coming from leads/caps etc to ground (engine or chassis) missfiring under load can be lots of this...plugs/caps/leads etc so is a little more dificult to diagnose.

Martin

thanks martin .it runs and starts fine . i have had it 3 years and put new cap and rotor arm on
. dont know when if thay have been changed as i have all service details but it dont say .
so i think i will leve it and have a look when it is cold and damp .thanks john .

I've just been to GSF not 'arf an hour ago for a rotor arm and I just asked what brand they stocked. It was Beru, which is German made & the same as the leads & coil I've had from Brickwerks. There is a section in Bentley's on how to test the impedance (if I recall correctly) of your leads etc to see if they are in specification but as stated, the easiest test is if the engine is running ok under load. I recently changed the leads etc as I had an electrical fault I was trying to eliminate. Turns out it was something else but for the money (and the age of the old parts) I was happy to change it.

thanks for info , i will try it going slow in top gear up hill to see it it will miss .
it might pay to put new set on as you cant tell till you do , and i dont know how old thay are . thanks

just had a look on e-bay , set of leads called popran from germany and set of bosch plugs .
£27.50. plus £4.50 post .sounds good but dont know the name of the leads . eny one heard
of them .thanks.

sorry the leads are called topran .

Beru are better......

thanks i will go with them .