Club 80-90 Forums

Hi all have been reading through loads and loads of posts today. I am struggling to find a defintive answer. So, is it possible to adjust the camber on the rear (1982 2wd if that makes a difference) or not? I have just lowered the van by 45mm and the rear appears to need the camber adjusting as well as the fronts. If it is poss could someone give me a quick run down on how to do it.

Thanks in advance Richie

The rear trailing arm rubber bushes have bolts running through them which when slackeded off can provide adjustment. The outer bolt bracket has a vertical slot (for camber adjustment) and the inner bolt bracket has a horizontal slot (for toe-in) adjustment. You will need the outer adjustment.
I would only adjust these though if you are noticing uneven tyre wear.

Same answer as on the brick-yard

http://www.brick-yard.co.uk/forum/rear- ... 56104.html" onclick="window.open(this.href);return false; View Post

Cheers for the replies fellas much appreiciated.

Richie