Club 80-90 Forums

http://www.brickwerks.co.uk/index.php?p ... t&Itemid=6" onclick="window.open(this.href);return false;

It says simple DIY fitment.
How simple is that exactly and how difficult is it to remove the old ones?
Can it be done comfortably without ramps?

Straight forward job, an hour and a half inc a coffee.

Sometimes the remains of the old bushes have to be pulled out using threaded bar,nuts,washers and a suitably large socket.

Axle stands were sufficient.

Ian

I don't have any axle stands. Maybe a convenient kerb will suffice?

Suppose that's possible ..... time to invest though perhaps ?

More questions

Recommend any brand?
And what rating do they need to be?
Where is best to locate on the chassis, front and back?

Cruz wrote:More questions

Recommend any brand?
And what rating do they need to be?
Where is best to locate on the chassis, front and back?

I have a few sets of similar to these work well more than up to the job

http://cgi.ebay.co.uk/DRAPER-64431-PAIR ... 2a08e225f6

jamesc76 wrote:

Cruz wrote:More questions

Recommend any brand?
And what rating do they need to be?
Where is best to locate on the chassis, front and back?

I have a few sets of similar to these work well more than up to the job

http://cgi.ebay.co.uk/DRAPER-64431-PAIR ... 2a08e225f6

Do you put them just behind the jacking points?

yeah on the chassis rail, put a bit of wood between the two so as not to damage owt tho!