Club 80-90 Forums

replaced the fuel sender this everning, bit of of a pain to do, got it done in the end. any how i found a terminal that was wraped up with all of the outher wires that run under the sender along the chassis rail. is it anouther one of those conectors that was in the loom like the power stering wires that re next too the dianogstic plug next to the altinater.

thanks neil

Did we get you in the mood when you called round earlier? Noticed you fhoocked off when we got the CV grease out Cant blame you really.

Jed

axeman wrote:any how i found a terminal that was wraped up with all of the outher wires that run under the sender along the chassis rail. is it anouther one of those conectors that was in the loom like the power stering wires that re next too the dianogstic plug next to the altinater.

Power steering wires ..... what?

I think neil means the ecu - power steering plug. The plug in your picture is for the decoupler switch (tells you when its locked )
Pete

Hi Pete, hope all's well, sounds like it is...

Yup, decoupler tell-tale, they all have that in the wiring loom, presumably specified before decision to go VC only, and left in to avoid late changes?