Club 80-90 Forums

Hello all, I have been contemplating a complete front end build as the Brakes need replacing (Disks and Calipers) and the front bearing on the O/S is getting hot (MOT due August!)

So while its all apart i'm going to rebuild it, inc new CV's, UJ's, Rubber mounts, upper and lower ball joint etc.

Is there an off the shelf kit to buy for all the rubber mounts or is it a case of buying individual ones?

I'm finding it hard to find part numbers, any idea where I can get them?

Thanks all

Brickwerks stock them all. I've had a box of them in my garage for the past 4 months waiting for me to get motivated!!!


If you get a crack on, any tips would be appreciated!

Did this last year https://club8090.co.uk/forum/viewtopic.p ... nd+rebuild" onclick="window.open(this.href);return false; if it's of use

Any chance of re-linking the photobucket pics?

Here is one I did earlier.

No high tech devices used.

http://s199.photobucket.com/albums/aa28 ... ?start=all" onclick="window.open(this.href);return false;

You will need to get the wheel bearings pressed in and out