Page 1 of 1
diesel inlet manifold torque settings!
Posted: 03 Jul 2010, 14:22
by lhd
I can't find them anywhere searched the Bently wiki brickyard, I know there somewhere.......
Cheers Rob.......
Re: diesel inlet manifold torque settings!
Posted: 04 Jul 2010, 14:37
by dave friday
page 26.6[Bentley] 25nm[18 ft lb ].
what engine did you fit?
Re: diesel inlet manifold torque settings!
Posted: 05 Jul 2010, 01:16
by lhd
dave friday wrote:page 26.6[Bentley] 25nm[18 ft lb ].
what engine did you fit?
That's the exhaust manifold.
I have checked all the way through it page by page and can't find anything to do wilth (other than a picture of it joined to the cylinder head) either the inlet manifold or air filter.
There Is a mention of inlet manifold torqes on page 15.1 but that's for the Aircooled?
Rob.
Re: diesel inlet manifold torque settings!
Posted: 05 Jul 2010, 09:30
by dave friday
oops!,i will look in the justkampers book.
Re: diesel inlet manifold torque settings!
Posted: 05 Jul 2010, 17:53
by dave friday
Ok,the Justkampers book says 2.5kgm [18ft lb] [for the turbo inlet manifold].
Re: diesel inlet manifold torque settings!
Posted: 05 Jul 2010, 19:14
by lhd
cheers.
