Club 80-90 Forums

Have been advised that the rear discs & pads on the wifes '06 A4 (2wd). Does anyone know if this is difficult to do &/or any torque settings etc?

Thanks for looking.

Rob

If they are anything like on the A3 they are fairly easy to do, but you will need a caliper wind back tool to get the piston back into the caliper.

Is there an easy way to 'improvise' a wind back tool?

A G-Clamp or similar can work.

You need to have the tool, same as a Sharan/Galaxy, as it has to be squeezed and turned at the same time.
The tool is really cheap and makes it a quick job.

Next question is; where can I get one? Will Halfwits or GSF do them?

yep both will stock. gsf best bet first as probably abit cheaper.

http://www.halfords.com/webapp/wcs/stor ... =IOV4PLPZ1" onclick="window.open(this.href);return false;

Although when I bought mine from GSF I think it was about £20

Cheers all!