Page 1 of 1
JX Exhaust 'Rip Plate'
Posted: 15 Jun 2010, 08:02
by Mudlark
Metal plate at right hand side of exhaust that bolts to the bottom of the sump.
ETKA have two listed: 068 251 370 and 068 251 053J; any idea which one is going to fit on my 91 AFN 1.9tdi.
Anyone know if its still available from VW or an alternative source as mine has ripped ?
Thanks
Re: JX Exhaust 'Rip Plate'
Posted: 15 Jun 2010, 08:17
by syncropaddy
Weld it ....
Re: JX Exhaust 'Rip Plate'
Posted: 15 Jun 2010, 12:26
by Mudlark
Been there done that once already Andrew ... and it may come to that again
Re: JX Exhaust 'Rip Plate'
Posted: 15 Jun 2010, 12:31
by Aidan
370 is the syncro one
053J is the whole back box
Re: JX Exhaust 'Rip Plate'
Posted: 15 Jun 2010, 13:09
by Mudlark
Ta Aiden; TPS showing two in stock £13 + VAT so have ordered it. The other part number is £110+ so that figures; though both are showing as the same item 13 on ETKA which is why i asked.
Re: JX Exhaust 'Rip Plate'
Posted: 15 Jun 2010, 17:35
by Simon Baxter
I had them remade, just a bit cheaper than vw.
Re: JX Exhaust 'Rip Plate'
Posted: 15 Jun 2010, 20:04
by Mudlark
Well if VW's 'two in stock' evaporate I will be in touch Si !
Re: JX Exhaust 'Rip Plate'
Posted: 15 Jun 2010, 21:22
by futbus
Just remanufactured the TD exhaust mounts for both sides of the exhaust. Should be back from the platers tomorrow and i`ll put up pictures and prices.
Re: JX Exhaust 'Rip Plate'
Posted: 16 Jun 2010, 20:21
by futbus
Just in from the platers today
http://futbus.com/Exhausts/TD-Exhaust-Mount.html" onclick="window.open(this.href);return false;
The other side also in stock and will be on the site shortly.