Page 1 of 1
2.0l gearbox into a 1600ct van
Posted: 13 Jun 2010, 16:16
by umgum
i have put a 2.0l Aircooled engine in my van to replace the ct
i have just got hold of a 2.0l Aircooled (dk) gearbox what do i need to do
it is basicaly a bare gear box there is a bracket on the box
Re: 2.0l gearbox into a 1600ct van
Posted: 13 Jun 2010, 18:52
by billy739
only difference will be the ct is cable clutch the dk hydraulic.
eith chane the bellhousings or just the lever parts , which may be difficult due to seizure!
Re: 2.0l gearbox into a 1600ct van
Posted: 13 Jun 2010, 20:07
by toomanytoys
As I said earlier...
But changing the arms will be difficult, they dont like to come apart after 30 years.... bellhousing swap is easier..
And as I also said, going hydraulic means fitting a master cyl at the pedal box.. it may mean changing the pedal box to a hydraulic one as I dont know if they are different (I would imagine thay are)