Page 1 of 1

my idle stabilizing unit is missing

Posted: 23 May 2010, 22:19
by karl40
Hello all, i have ongoing problems with ignition and timing and i have found that the idle stabilizing unit is missing and the connections that would have plugged in there have been joined together. Is this a problem as i cant seem to buy one anywhere??

Re: my idle stabilizing unit is missing

Posted: 24 May 2010, 07:09
by billy739
they seem to work quite happily without it.

common fix casuse you cant get them ,and it seems to work fine!

Re: my idle stabilizing unit is missing

Posted: 24 May 2010, 08:25
by meehaja
there are a few ISU's around, but as billy says, you don't really need it. I had this panic when my ignition went arry and noticed it was missing. If i recall correctly, the ISU is more to do with stabilising the charge from the alternator (or something like that) for internal lights etc.

Re: my idle stabilizing unit is missing

Posted: 24 May 2010, 08:27
by orangebooboobearcrew
Hi,

When we bought our van, this was missing but we managed to get a new one from JK. Don't know if they still do them though - it was a couple of years ago now and cost about £70.

As everyone says, they seem to work fine without them with the connectors plugged together...

Thanks,

Chris

Re: my idle stabilizing unit is missing

Posted: 24 May 2010, 08:31
by SyncroSwede
The only time I notice the ISU effect is when setting the idle mixture & tickover (when the ISU is by-passed). When the monster cooling fan kicks in, the engine revs dip almost to the point of stalling but a little throttle blip picks it up. Otherwise I'm not sure the £70 JK charge is worth it.

Re: my idle stabilizing unit is missing

Posted: 24 May 2010, 17:32
by faggie
i may have a 2nd hand one if your not sorted