Club 80-90 Forums

hey there
i am rebuilding my 1,9 dg carb2e3
i found only 2 dowels pins under the bearings of the crankshaft
how many dowel pins have to be there? and in which place?
thanks
gil

I am sorry Gil but your post doesn't make much sense ,,,,,,,to us sober types,,,,,

Try again, are you in need of carburettor information or info regarding dowel pins on the flywheel ?



Regards


Fritz,,,,,,,

Quite clear -
petrol/carb engine.
dowel pins for crankshaft bearings - no mention of flywheels!!!!!!!!!!

How many of?
Sorry cannot help re no. of dowels.

hey
may be my question is not clear
the dowel pins are those between the bearings of the crankshaft and the block
there are on the block four holes: one for each bearing.
when i took off the crankshaft of the block i found only 2 dowel pins
my question is to know if it is normal or it has to be four dowel pins
my van is a 1985 1,9 dg carb 2e3
a dowel pin looks like this:
http://busdepot.com/details.jsp?partnumber=111101123" onclick="window.open(this.href);return false;
thanks
gil

there are five dowel pins in the block in total according to ETOS